Test Data

TEST REPORT# CHARACTERISTIC TESTED TEST STANDARD FILM TYPE RESULTS
INTERTEK
INTERTE5
INTERTE6
Impact Resistance 16-CPSC 1201
Safety Glazing
4 & 7 mil Passes Category I & II
INTERTE5
INTERTE6
INTERTEK
HUNTING, 1-1
Weathering 16 CPSC 1201
Safety Glazing
4 & 7 mil Meets the requirements
of section 1201.4(e) 1(iv) and 2(iv)
INTERTEK1-1
Impact Resistance ANSI Z97.1 4 & 7 mil Passes Unlimited Requirements
INTERTEK1-1
Weathering ANSI Z97.1 4 & 7 mil Meets the requirements of section Z97.1.5.3.1
INTERTEK1-1
Impact Resistance ANSI Z97.1 4 mil NSN 70, Grey 35, Solar 15, Bronze 20 Passes Unlimited Requirements
WELMARK
Impact Resistance BS 2606 4 & 7 mil Passes
SSFP96-2
Impact Resistance Din A1
Din A3
14 mil one-side
14 mil two-sided
Passes
CELOTEX2
Tensile Strength ASTM D882-95a 4 mil
7 mil
24,196 PSI
25,371 PSI
CELOTEX4
Puncture Test ASTM D882-95 4 mil
7 mil
76.9 LBF
162 LBF
CELOTEX3
Peel Adhesion ASTM D3330-96
ASTM G26
4 & 7 mil 5.5 lbs/in pre-Weathered 10.3 lbs/in Weathered
CELOEX1
Surface Abrasion Resistance ASTM D1044-94 All Safety Security Film Delta Haze-1.94%
CELOTEXA
Tear Resistance ASTM D 1004-94 4 mil
7 mil
11 LBF
22 LBF
INTERTE1
ETLASTM1
Ignition Properties of Plastics ASTM D 1929-91 4 & 7 mil Flash Ignition Temp. 530C
Self-Ignition Temp. 550c
Time to Ignition 1:23 min
INTERTE4
Surface Burning Characteristics ASTM E84-97 4 & 7 mil Flame Spread Index-10
Smoke Developed Index-10
INTERTE2
Rate of Burning ASTM D635-88 4 & 7 mil Material did not stay ignited long enough to get a reading
INTERTE3
Ultra Violet Light Transmission ASTM E1348-90 IG Unit w/4 mil Film on Surface 2 and 3 Blocks 99.9% of U
ATL97-06.02
Wind borne debris Dade County Small Missile Test 4 mil Meets the requirements of PA201 and PA203 standards up to 50 PSF
WBE
Bomb Blast Mitigation GSA's Method for Glazing Systems Subject to Air Blast Loading* 12 mil** Performs to GSA Hazard Level 3
HPWHITEH
Ballistics .38 Special HPW-TP-0500.02 12 mil on 3/4 glass No Penetration-3 shots
HPWHITEH.02
Ballistics 9mm HPW-TP-0500.02 12 mil on 3/4" glass No Penetration-3 shots
WPWHITEH.022
Ballistics .38 Special HPW-TP-0500.02 12 mil on 1/2" glass 3 shots
2-no penetration
1-penetration
ETLASTME
Sound Transmission Loss Text ASTM E90-9-
ASTM E413-87
4,7 & 12 mil No Loss of Sound Transmission

Abbreviation Table

ANSI American National Standards Institute
ASTM American Society for Testing and Materials
BS British Standards
CPSC Consumer Products Safety Commission
GSA General Services Administration
LBF Pounds Force
MIL Thickness Measurement
PSI Pounds Per Square Inch